2014 RAM 1500
Mileage
257,551
Service Date
9/24/2024
Services Performed
- -HAD TO JUMPSTART VEHICLE, FOUND ENGINE KNOCKING UPON START UP. SCANNED AND THE VEHICLE HAD TONS OF CODES (SEE ATTACHED). VEHICLE HAS NO THROTTLE CONTROL. OIL IS OVER FULL AND THE LIFTERS/ROCKERS SEEM TO BE MAKING NOISE AS WELL. OIL PRESSURE SWITCH IS STUCK AT 3.4 PSI RUNNING OR NOT. CHECKED POWERS AND GROUNDS AT THE PCM AND FOUND PCM CONNECTOR HOLD DOWN IS BROKEN AND MISSING ALL WIRES. TESTED OK AT PCM. TEST WIRES AT PEDAL ASSEMBLY AND ALL WIRES TESTED OK BUT NO SIGNAL WAS COMING BACK ON SENSOR 2, TESTED PIN FITMENT AND FOUND GROUND WIRE WAS NOT SNAPPED INTO CONNECTOR AT THE PEDAL ASSEMBLY. SNAPPED WIRE INTO HARNESS AS DESIGNED AND RAN THE RELEARN THROUGH THE COMPUTER, NOW PEDAL OPERATES AS DESIGNED. CHECK ENGINE LIGHT REMAINS ON FOR A BEVY OF CODES (SEPERATE ISSUES)- CLEARED CODES BUT MANY WILL RETURN. CUSTOMER IS NOT ADDRESSING THOSE AT THIS TIME
TIMOTHY B. gave our service a 5 star review on 9/24/2024
